Back

How can I connect Intuvia 100 to the smart system?

Please carry out the following steps:

  1. Install the eBike Flow app.
  2. Activate Bluetooth® on your phone and open the eBike Flow app.
  3. Connect your smart system eBike to your eBike Flow app.
  4. Go to  ** Settings > My eBike > eBike pass > Components**
  5. Tap Add new device > Intuvia 100.
  6. Press and hold the Bluetooth button on the back until Pairing Mode is displayed on the Intuvia 100 display. Now release the Bluetooth button. A 30-second countdown is displayed and your Intuvia is found.
  7. Compare the 12-digit MAC address on your Intuvia display with the MAC address in the eBike Flow app to make sure it is your display.
  8. Tap Connect to confirm the pairing process in the app.

If the connection is successful, your Intuvia 100 will appear in the Components section.

If the MAC addresses do not match, click the Try again button.

If you are prompted to enter a MAC address, update the eBike Flow app to the latest version.

If the connection still doesn't work, you should contact your  bicycle dealer. The dealer can establish a connection using the diagnostic tool.

By playing the video, data is transmitted to Google Ireland Limited. For further information on processing, please see Google's Privacy Policy.

By playing the video, data is transmitted to Google Ireland Limited. For further information on processing, please see Google's Privacy Policy.

Tell a friend

Share link

Any questions?
We're happy to help.

Contact

Help Center

Any questions?
We're happy to help.

Contact