ABS screen
ABS screen at startup
If the eBike has a Bosch eBike ABS, when the system starts the ABS control light on the control unit and, possibly, the ABS control light in the Kiox 300 or Kiox 500 display light up.
The ABS control light goes out as soon as your eBike is travelling faster than 4 km/h and the ABS does not detect an error.
ABS error while riding
If an ABS error occurs while riding, the orange ABS light on the LED Remote or System Controller will light up along with orange flashing state of charge and module indicators. If you are using a Purion 200, the ABS icon will appear on the display. The display of the Kiox 300 or Kiox 500 and the eBike Flow app (if available) will issue an error message to signal that the Bosch eBike ABS is not active. If you acknowledge the error by pressing the selection button, you can continue riding, but please note: that as long as the ABS light is on or the ABS icon is displayed in the status bar of your display, the Bosch eBike ABS is inactive. If you use a Kiox 300 or Kiox 500 in combination with a Purion 200, the ABS icon will be displayed on the Purion 200.
This video explains what the Kiox 300 display shows when you use the Bosch eBike ABS.
ABS screen
If your eBike is equipped with Bosch eBike ABS, you can check the ABS screen to see the ABS mode as well as the duration and braking distance of your last braking process. You can use Display configuration to customise the screen.
