Back
Can I mount the SmartphoneGrip in different positions?
Yes. This is possible. The alignment of the display mount can be adjusted by opening the screw on the handlebar clamp. Once the desired alignment has been set, the screw can be tightened again.
It is also possible to adjust the tilt angle of the smartphone. To do this, loosen the screw on the side of the holding arm and set the desired tilt angle. Due to the locking mechanism, the angle can be adjusted in increments of about 20°. After the right position has been found, the screw is retightened.
Note: After mounting the smartphone, make sure that the smartphone cannot touch any fixed parts on the bike even in the event of vibration. This could permanently damage the smartphone.
